High-Purity Ferro Titanium Alloys
Ferrotitanium(Fe-Ti) is a Ferro Alloy of Ti and is available in many grades, but the most common grades contains 30% to 75% Ti. Fe-Ti may contain a small amount of C. Since the main use of Ti is as a cleansing agent for S, C, 0 and N, hence Fe-Ti with the lowest possible content of these elements is preferred for steelmaking. Fe-Ti with 70% Ti & 30% Fe falls at the eutectic point of the system, with a melting point of 1085 deg C.
It is known as eutectic Fe¬Ti. As this is well below steel making temperatures, the ferro alloy melts, which is far quicker than the dissolution required for metallic Ti to enter the steel. It is for this reason that eutectic Fe-Ti is the preferred analysis for use in steel making.
Engineered for Steelmakers and Foundries | Consistent Quality. Controlled Chemistry. Efficient Absorption.
Ferro Aluminum
Aluminium(Al) isused for deoxidizing and grain refining in steels. It is a strong deoxidizer. It is also used as nitride former and as an alloying agent. Its ability to scavenge nitrogen(N) from steel makes it a useful addition in drawing quality steels, especially for automotive applicalions. Aluminum(Al) is being used as a deoxidizing for more than 100 years. Deoxidation of steel with Al is common practice today. Al plays an important role in secondary metallurgy.
It forms aluminium oxide or alumina(Al203) and decreases the amount of oxygen in the steel during the production of killed steels. Al is also added as Ferro-aluminium which is a dense and highly efficient form of aluminium addition. Ferro-aluminium contains 30% to 70% Al and normally added in lump form.
Why Choose Our Ferro Titanium?
Consistent Composition
Maintains 65–75% Ti grades for steel plants, 30–45% for foundries.
Low Impurities
Controlled Sulfur, Carbon, Nitrogen, and Oxygen levels.
Rapid Absorption
Eutectic FeTi melts fast at 1085°C for efficient titanium diffusion.
Custom Sizing & Packing
Options from 10–30 mm up to 70 mm in steel drums or jumbo bags.
Technical Specifications
| Grade | 65–75% Ti or 30–45% Ti |
|---|---|
| Typical Composition | 70% Ti / 30% Fe |
| Melting Point | 1085°C (Eutectic Point) |
| Nitrogen Control | Up to 1500 ppm |
| Sizes Available | 10–30 mm, 10–50 mm, 10–70 mm |
| Packaging Options | Steel drums, jumbo bags, gunny bags |
Controlled Manufacturing Process
Argon Purging
During cooling phase ensures low nitrogen & oxygen grades.
Clean Scrap Blending
Washed & dried titanium turnings prevent contamination.
Aluminium Content Control
Precisely blended to ensure alloy purity.
We believe in quality and competitiveness.
A close cooperation with our clients, and a careful selection of raw materials for each purpose allows us to offer high quality Cored Wire products based on different alloys for iron and steel industry. To ensure metallurgical soundness and consistent quality, we have quality control laboratory with most modern testing equipments. Our manufacturing is backed by quality management system certified to ISO 9001:2015. We strive to meet the expectations of our client through dedicated quality oriented team work.
